A Simple Guide To Air Conditioner Repair

An Overview Of Air Conditioner Repair

Probably the most common reason why you would need air conditioner repair is when the unit stops cooling. Often times however, this just means that the system needs a good cleaning. It is best to do this on a warm day and always make sure that you follow the direction in your instruction manual for trying anything. Before cleaning, you also want to make sure that the device is entirely turned off. You can use a soft brush to clean out most of the dirt and debris from the various parts in the unit; just be extra careful that you do not unplug or tear any of the wires.

Sometimes you will need air conditioner repair if the device refuses to turn on.

  • If this happens to you the first thing you will want to do is make sure that the thermostat is set to cool and that the temperature is low enough that it will need to turn on.

  • Afterwards, check the circuit panel to make sure that no fuses have blown.

  • If you find one has blown, simply replace it and try to turn the unit on again.

  • If it still does not work, make sure that the furnace power switch is on as well as the outdoor condenser.

  • If you still don’t have any luck then you are probably having trouble with the thermostat.

Look At Drain Tubes In Air Conditioner Repair

Although certainly not as much of a problem, when large pools of water form around your system it can be a nuisance. It could be a result of a blockage in the drain tube which is intended to funnel the water away to another location.

  • First simply check to make sure that there are no leaks in the tube.

  • Next, you will want to test the condensation pump by pouring water into the pan. If it does not automatically come on than it may be broken and need to be replaced.

  • Finally, check to see if algae or something else is blocking the tube.

Noisy Ducts

One final problem you could be experiencing is noisy ducts. Because ductwork is made out of metal most of the time, it can really carry sound. This can be fixed however by having a contractor insert insulation in between the system and the ductwork. One of the more common causes of noise is a loose flap of metal. If this is the case, then follow the noise to the exact location that is causing the noise and make a small dent.

If you are going to enlist the services of a professional to handle your air conditioner repair, just make sure that you only hire someone who is licensed to work on your specific brand. For example, if you own a Rheem unit, be certain that you ask them specifically if they are licensed to work on the Rheem brand A/C units.